This 12" Flexible LED Light Strip Kit in a clear tube has 1/2" spacing between each super bright LED. It is a versatile product that is available in eye-grabbing colors to meet any rider’s needs. The LED Lights Strips can be cut every 3 LEDs (up to 8 individual strips) and each section can be used individually. Each kit comes with 18 inches of D-channel tube, 16 end-caps, 3' of 26 GA of silver stranded Teflon wire, and 3M adhesive automotive grade tape for a secure bond. A soldering iron will be needed to attach a wire on the solder pads located on back to each of the cut strips. Available in Amber, Red, and White. The Flexible LED Light Strips will flex front to back. If you are holding the board with the LEDs facing you, the ends can be moved towards you or away from you. The board will not flex horizontally.
The Flexible LED Light Strips can have a Run/Turn or Run/Brake function by simply adding a Run/Turn or Run/Brake Converter dual element circuit.
Legal Information
Laws governing the use of custom lighting vary from state to state. Some of these lights, or some colors may not be street-legal in some states, and are offered for parking lot, off-road or show use only. Please check with your local authorities before purchasing.
Fits:
- All Motorcycles - Universal - Not Designed for any specific make or model
The Flexible LED Light Strips can be bent as shown below, but not side-to-side.
Installation Instructions
