The Brightest Flexible LED Lights on the market! All Flexible LED Light Strips come in a D-Channel Tube That is .325" thick by .325" wide with double sided automotive grade tape on back, and are ready to add on to any 12 volt system. They can be used as Auxiliary Brake Lights, Auxiliary Turn Signals, and Accent Lighting - the possibilities are limitless! The Flexible LED Light Strips can be bent as shown to the right, but not side-to-side.
The 12" version of the LED Lights Strips can be cut every 5 LEDs (up to 20 individual strips) to be made into smaller strips, and each section can be used individually. Extra tubing is provided (19") to ensure you will have enough tubing for any smaller strips created. The 12" version also includes 8 end caps, 3' of 26 GA of silver stranded Teflon wire, double sided automotive grade tape. A soldering iron will be needed to attach a wire on the solder pads located on back to each of the cut strips.
All sizes of the Flexible LED Light Strips can have a Run/Turn or Run/Brake function by simply adding a Run/Turn or Run/Brake Converter dual element circuit.
Read the webBikeWorld review of the Radiantz Flexible LED Light Strips.
PATENT NO: US6371637 B1
Legal Information Laws governing the use of custom lighting vary from state to state. Some of these lights, or some colors may not be street-legal in some states, and are offered for parking lot, off-road or show use only. Please check with your local authorities before purchasing.
Product 2/7