Privacy
Order Securely Online
24/7/365 or Toll-Free:

1-866-496-3184

M-F, 9am - 5pm CST


HJC Symax 2 Helmet

  • Available in Anthracite, Black, Candy Red, Pearl White, Silver, White and Wine
  • Flip-up Chin and Face Shield
  • ACS Advanced Channeling Ventilation System
  • Removable, Washable Interior
  • Nylon Strap-Retention Band
  • SunShield Visor System
  • Model: SYMAX2
  • Shipping Weight: 6.5 lbs
HJC Helmets

$279.99    $251.95
Save: $28.04

Please Choose:

Color:

Size:

 

In Stock and Ready to Ship
Add to Cart:





Lightweight Shell Design
- Lightweight, fiberglass and Spectra® composite weave shell with an ABS / polycarbonate alloy chin bar
- Large eyeport opening for greater visibility
- Dual-density lightweight EPS liner

Flip-up Chin and Face Shield
- Single-button release allows chin bar/face shield to be opened with one hand
- Central locking mechanism can easily be operated with either hand
- Flip-up chin bar makes communicating with your helmet on easier, and wearing glasses more comfortable

ACS Advanced Channeling Ventilation System
- Multi stage intake vents combine with rear exit vents to provide flow-through ventilation
- Chin bar intake vent provides airflow across the shield interior to help eliminate shield fogging

Removable, Washable Interior
- Removable, washable, Silvercool™ anti-bacterial, moisture wicking comfort liner

Nylon Strap-Retention Band
- Neatly secures padded chin strap

SunShield Visor System
- One-touch integrated smoke-tinted SunShield deploys and retracts quickly and easily
- HJ-S2 multi-stage shield closure mechanism compresses the shield into the eyeport gasket, providing an extremely secure seal

TECHNICAL INFORMATION
- Standards: DOT-218
- Construction: Fiberglass and Spectra® shell with ABS / Polycarbonate Alloy chin bar
- Weight: 3.8 lbs / 1740 grams (approx, based on Size Medium Solid Color)

Proper Fit of HJC Motorcycle Helmet
WarningNever buy a used helmet or borrow someone else's helmet. Over time the protective foam in helmets will adjust to the contours of a user's head. A used or borrowed helmet may not offer as much protection as a new helmet.

Warning Wearing the wrong size helmet can increase your risk of serious injury or death in an accident. A helmet that is too large for your head may be dislodged or knocked off in an accident. To select the right size helmet for your head, follow these instructions:

1. Measure your head. Wrap a tape measure around your head about one inch (2.5 cm) above your eyebrows.
2. Use the sizing chart to select the helmet size that corresponds most closely to your head measurement. If your head size falls between two helmet sizes, try on the larger helmet first and then the smaller size.
3. Try on the helmet by grasping both chin straps to pull the helmet completely onto your head, ensuring that the top of your head is in contact with the top of the helmet interior.
4. Check for a proper fit. To make sure your helmet is the right size, check that:
- The helmet inner lining fits snugly around your head.
- The top pad presses firmly on your head.
- The cheek pads contact your cheeks.
- There is no space around your brow under the inner lining. Test this by trying to insert your fingers. If the helmet does not fit snugly, try on a smaller size.
5. Check your field of vision when trying on a helmet. Some helmets may obstruct or block your vision when looking left, right, up, or down. WarningAlways make sure you can see well enough to safely operate your motorcycle.
Motorcycle Helmet Fit 16. Test the helmet fit by placing your hands on each side of the helmet. While holding your head as motionless as possible, try rotating your helmet from left to right then up and down. If you can feel the helmet padding sliding on your head, it is too big, try a size smaller. You should feel the helmet move the skin on your head and face as you try to move the helmet. * The Sy-Max and CL-Max were designed to be used in the closed chin bar position, thus be sure all helmet "fitting" is done while chin bar is in the closed and locked position.
7. Fasten the retention system (chin strap) as tight as possible under your jaw without causing pain. There must be no slack in the strap, and the strap must be tight up against your jaw.
Motorcycle Helmet Fit 28. Test the retention system (chin strap)
- Put your hands on the back of the helmet and try to push the helmet off by rotating it forward.
- Put your hands on the front of the helmet above your forehead (or on the chin guard) and try to push the helmet off by
rotating backward.

WarningIf helmet comes off, try another size or another model or brand. Repeat steps 3 through 8 until you find a helmet that fits your head snugly and securely

HJC Symax 2 Modular Motorcycle Helmet Size Chart

Size
Centimeter
Hat Size
Inches
XXS
51-52
6 3/8 - 6 1/2
20 - 20 1/2
XS
53-54
6 5/8 - 6 3/4
20 7/8 - 21 1/4
S
55-56
6 7/8 - 7
21 5/8 - 22
M
57-58
7 1/8 - 7 1/4
22 1/2 - 22 7/8
L
59-60
7 3/8 - 7 1/2
23 1/4 - 23 5/8
XL
61-62
7 5/8 - 7 3/4
24 - 24 3/8
XXL
63-64
7 7/8 - 8
24 3/4 - 25 1/4
XXXL
65-66
8 1/8 - 8 1/4
25 5/8 - 26



Authorize.net
VisaAmerican Express
MasterCardDiscover
Acceptance Mark


Your IP Address is: 38.103.63.57
Copyright © 2008 BikerHiway
Toll Free: 1-866-496-3184


*All products in this catalog are intended and sold for aftermarket use only. Part numbers and corresponding descriptions on BikerHiway.com or in our printed matter are not intended to imply that any of these parts are original equipment by any motorcycle manufacturer, or endorsed by any motorcycle manufacturer. The products, parts and accessories, offered on this site, unless marked "officially licensed," are not manufactured or endorsed by Harley-Davidson, Inc., Honda Motor Company, Kawasaki Motor Company, Yamaha Motor Company, Suzuki Motor Company, Triumph, or any other motorcycle manufacturer. All mentioned models, brand names, motorcycle names, trademarks or registered trademarks are the property of their respective holders. Click on this link for more information on corporate names, specific brands, model names, and trademarks.