( 0 items )

Welcome to BikerHiway, your best source for motorcycle accessories, apparel, and helmets.

LiveZilla Live Help

Kisan TailBlazer 25LED Brake Light Flasher


MSRP $79.95

OUR PRICE

$64.95

Save $15.00!


  • Model: 25LED BF
  • Shipping Weight: 0.34lbs
  • Manufactured by: Kisan Technologies


Quantity:

Product Details:
  • For Goldwing 1500 SE Motorcycles with Spoiler LED Light Bar
  • Unique Exponential Decay Flash Pattern
  • Dual function unit
  • Programmable Running Light Intensity for Brake Lights
  • Mounts on Back of the Trunk Lid

Product Description:

TailBlazer Model LookupBE SAFE! Compared to a typical automobile, motorcycle brake lights are simply too small to attract immediate attention. This is especially true for the cruisers because they are mounted so low to the ground.

TailBlazer overcomes this by rapidly flashing the tail lights the instant you apply the brakes. The flash rate then slows down to a steady ON - this cycle lasts about four (4) seconds. This flash pattern is called a Deceleration Warning.

The Motorcycle Safety Foundation (MSF) suggests that you pump your brakes at each stop. TailBlazer does it automatically, and by flashing the brake at maximum brightness.

25LED unit is designed for Goldwing 1500 SE models with the spoiler LED light bar.

25LED unit mounts on the back of the trunk lid.

This is a special unit designed to work with a split voltage supply. Nominal voltage change is from 6 volts to 12 volts when the brakes are applied.

What do they see?
As soon as you tap your brakes, drivers behind you will see the brake light(s) modulate rapidly at first then slow down to a solid ON over a period of four (4) seconds.This sudden flashing invokes immediate attention.

What will they think?
TailBlazer uses a flash pattern which decays exponentially - a well-recognized deceleration warning. The attention to the initial flashing now changes to a clear recognition that you're beginning to slow down!

Simply flashing brake lights or flashing them on & off will get the attention of drivers behind you, but it doesn't invoke anything else. Every split second of delay in their reaction reduces your safety margin.

The internal circuitry is controlled by a microprocessor. The trigger voltage to begin the deceleration flash pattern when the brakes are applied is set at 12.1V min. Therefore you may need to have the engine running for brake flash to occur reliably. Deceleration flash pattern for the brakes will always be at full intensity.

Simply hold the brakes and then turn the ignition on three times quickly. There are two selectable intensities "High" and "Low".

Will the TailBlazer 25LED Brake Light Flasher work with my motorcycle?
The 25LED unit is a plug-in unit designed for Goldwing 1500 SE models with the spoiler LED light bar.

To determine which TailBlazer model is correct for your motorcycle, please use our TailBlazer Model Lookup. If your motorcycle is not listed, please call us, toll-free, 1-866-496-3184.

Is the TailBlazer 25LED Brake Light Flasher legal in my state?
Yes. The TailBlazer 25LED is legal in all 50 states.

I have installed TailBlazer 25LED Brake Light Flasher. The LED light bar comes on with the ignition but there's no flashing with the brakes. Is the unit defective?
If the light bar comes on with the ignition, it is working. The trigger voltage for the flash pattern requires 11.9 volts. You may have to start the engine and then apply the brakes to trigger the flash pattern.

This TailBlazer Fits:

Honda
- 1988-2000 GoldWing 1500

TailBlazer Model Lookup
Find the right TailBlazer Model for your Motorcycle

Installation Instructions



SSL Certificates

Copyright 2014 - BikerHiway