Welcome to BikerHiway, your best source for motorcycle accessories, apparel, and helmets.

3 in 1 Feature!
1) Sequential Turn Signal
Right and Left Red LED arrays indicate sequential turn signals. These superbright Red LEDs (8500 mCd) have a wide viewing angle of 180 degrees. They are sunlight readable, even from the adjacent lanes.

2) Brake Light Flasher
A cluster of 6 Red LEDs is magnified by an acrylic lens to broadcast the Deceleration Warning sequence. As soon as you tap the brakes, they modulate rapidly at first then slow down to a solid ON over a period of (4) seconds.

3) Running Lights
This is a programmable feature. For additional visibility, all LEDs stay ON at reduced intensity, but you can also turn this feature Off. All electronics are encased in a scratch resistant polycarbonate housing and sealed for weather protection.

All electronics are encased in a scratch resistant polycarbonate housing and sealed for weather protection.

Alloy License Plate Holder
The frame is die cast alloy for strength and durability. The Black Frame is powder coated in black polyurethane with a "Wrinkled finish" to match non-chrome European trim. The Chrome Frame is a high gloss chrome finish that is polished to perfection.

Designed to fit the most commonly used 7-1/2" license plates.

The VectraLight License Plate Frame draws very little current (3/10th of an AMP), so it does not interfere with integrated ABS or EVO brake systems. Requires connecting to the turn signal and brake wires. You do not have to cut any wires if you use the Scotchlok (T-Tap) connectors, which are also supplied.

VectraLight LPB-16 can be mounted with the LED arrays on top or bottom of the license plate.

Fits:
- All Motorcycles - Universal - Not Designed for any specific make or model

Installation Instructions