( 0 items )

Welcome to BikerHiway, your best source for motorcycle accessories, apparel, and helmets.

LiveZilla Live Help

Radiantz 1156 LED Cluster for newer Yamahas - 1.85" - Pigtail - Red

Lowest Price Guarantee

MSRP $24.99



Save $2.50!

  • Model: 3202-15
  • Shipping Weight: 0.25lbs
  • Manufactured by: Radiantz LED Lighting


Product Details:
  • The Brightest LEDs on the Market
  • For Newer Yamaha's with 2-pin Offset
  • Single Intensity/Contact 1156
  • 48 Super Bright Red LEDs
  • Wide Angle
  • Lifetime Manufacturer's Warranty

Product Description:

This 1.85" LED cluster contains 48 super bright, wide-angle, single intensity 1156 Red LEDs. This easy-to-install Pigtail version can be secured in the housing with double sided tape, silicon/epoxy, or foam insulation. Perfect for replacing stock turn signals, brake lights, and additional tail lights.

These clusters are designed for Newer Yamahas with 2-pin Offset configuration.

Read the webBikeWorld review of the Radiantz Round Cluster LED Lights.

If you are planning on replacing your turn signal lights with LEDs, we also carry LED Lights specifically for Harley-Davidson motorcycles. Click here to see if we have a LED product specifically for your Harley.

1-7/8" Diameter
Length Tip to Tip: 1-3/4"
Stem Length: 1-1/8"

Technical Specifications
0.3 Amp
14 VDC

Important Notice when Replacing Stock Turn Signals with LEDs
LED lights consume much less power than stock incandescent or halogen light bulbs, and most stock turn signal flashers are not compatible with LED lights. If your existing turn signal lights are incandescent or halogen light bulbs, and you are replacing them with LED lights, you may need either a Load Equalizer or a Solid State Turn Signal Flasher so that your new LED Turn Signal lights flash correctly.

Important Notice for Motorcycles with a Single Turn Signal Indicator Light
The Diode Kit for Metric Motorcycles is required when installing LED lights as turn signals on a motorcycle with a single turn signal indicator light. The indicator light is a little light on the "dashboard" which starts blinking when your turn signals blink. Some motorcycles may have two of those, one for each side. Some only have one, which blinks for either side. If this diode kit is not installed on those single-indicator motorcycles, power will back feed across the indicator light and all turn signals, left and right, will flash at once, confusing other motorists.

Legal Information
Modification of the Original Lighting on any Motor Vehicle, including Motorcycles, may not comply with Federal Motor Vehicle Safety Standards. Lights which are not DOT certified, such as most LED bulbs, brake light bulbs, turn signal bulbs, and headlight bulbs, even if designed to produce bright red, amber, or white light, may not be approved for public road use. Depending on the location in which they are installed, these bulbs or lights may be for show car of off-road use only. Please check with your Federal and local authorities before replacing your original lighting products with any aftermarket lights.

SSL Certificates

Copyright 2015 - BikerHiway