TailBlazer Brake Light Flasher 25LED-LT - Plug-in

Kisan TailBlazer Brake Light Flasher 25LED-LT - Plug-in
BE SAFE! Compared to a typical automobile, motorcycle brake lights are simply too small to attract immediate attention. This is especially true for the cruisers because they are mounted so low to the ground.

TailBlazer overcomes this by rapidly flashing the tail lights the instant you apply the brakes. The flash rate then slows down to a steady ON - this cycle lasts about four (4) seconds. This flash pattern is called a Deceleration Warning.

The Motorcycle Safety Foundation (MSF) suggests that you pump your brakes at each stop. TailBlazer does it automatically by flashing the brake at maximum brightness.

25LED-LT unit is designed for BMW K1200 LT models with the rack mounted spoiler LED light bar.

This is a dual function unit - it powers the LED light-bar with low intensity as a Running Light, and upon brake activation it flashes the light-bar at full intensity.

What do they see?
As soon as you tap your brakes, drivers behind you will see the brake light(s) modulate rapidly at first then slow down to a solid ON over a period of four (4) seconds.This sudden flashing invokes immediate attention.

What will they think?
TailBlazer uses a flash pattern which decays exponentially - a well-recognized deceleration warning. The attention to the initial flashing now changes to a clear recognition that you're beginning to slow down!

Simply flashing brake lights or flashing them on & off will get the attention of drivers behind you, but it doesn't invoke anything else. Every split second of delay in their reaction reduces your safety margin.

The internal circuitry is controlled by a microprocessor. The trigger voltage to begin the deceleration flash pattern when the brakes are applied is set at 12.1V min. Therefore you may need to have the engine running for brake flash to occur reliably. Deceleration flash pattern for the brakes will always be at full intensity.

Simply hold the brakes and then turn the ignition on three times quickly. There are two selectable intensities "High" and "Low".

FREQUENTLY ASKED QUESTIONS (FAQs)

Will the TailBlazer 25LED-LT Brake Light Flasher work with my motorcycle?
Is the TailBlazer 25LED-LT Brake Light Flasher legal in my state?
How much does the TailBlazer 25LED-LT Brake Light Flasher cost to ship?
I have installed TailBlazer 25LED-LT Brake Light Flasher. The LED light bar comes on with the ignition but there's no flashing with the brakes. Is the unit defective?

Will the TailBlazer 25LED-LT Brake Light Flasher work with my motorcycle?
The 25LED-LT unit is a plug-in unit designed for BMW K1200 LT models with the rack mounted spoiler LED light bar.

It is also a dual function unit - it powers the LED light-bar with low intensity as a Running Light, and upon brake activation it flashes the light-bar at full intensity.

To determine which Tail Blazer model is correct for your motorcycle, please use our TailBlazer Model Lookup. If your motorcycle is not listed, please call us, toll-free, 1-866-496-3184.

Is the TailBlazer 25LED-LT Brake Light Flasher legal in my state?
Yes. The TailBlazer 25LED-LT is legal in all 50 states.

How much does the TailBlazer 25LED-LT Brake Light Flasher cost to ship?